Defi Advance CAN Driver Now Available!!!

We made mention of this newest offering from Defi a few months ago, and finally they’re here!

Just a quick rundown of what it is and what type of customer this is applicable to:

It’s a plug & play kit for OBDII vehicles. Let’s say you want high precision gauges in your car (which of course Defi makes!!!), but the hassle of having to install each gauges (temperature and/or pressure) is too time consuming, or even costly (especially if you have a technician install them). The Advance CAN Driver is your type of system!!!

By using the included OBDII Harness Kit (comes with part number DF15601), you simply hook up to the On-Board Diagnostic port, then link whichever Advance Series of gauges using the Daisy Chain meter wire from the CAN Driver to the gauge (and each subsequent gauge; up to three gauges can be installed). All that’s left is where you plan on mounting the CAN Driver unit and your gauges!

Installing gauges this way not only simplifies the installation process, but it also takes advantage of pulling all the engine data from the ECU. Afterall, the issue with OE gauges isn’t that their sensors are faulty or too slow. They are, in fact, quite accurate and quick. The real issue lies with how quickly the gauges return this real-time data into something you can see. The response time for OE gauges, as most of us know, is relatively slow. Now, with Advance CAN Driver operating your Advance series gauges, you have a high precision and fast functioning gauge setup, and all it took was a couple of minutes to hook up and get going!

However, some readings aren’t readily accessible from the factory ECU, such as engine speed (RPM). So, in order to use Advance CAN driver for other parameters like engine temperatures or pressures, you can still use Advance CAN Driver. But to get engine speed, you will need to use Defi’s Advance Control Unit in conjunction with the Advance CAN Driver.

So far, we have two available kits:

Defi Advance CAN Driver
part number: DF15601

MSRP: $189

Includes: Advance CAN Driver Unit, OBDII Harness Kit, Adapter Wire, Power Source Wire, Speed & Tachometer Signal Wire, and a few small installation parts.

CAND_Meter_ZD

*does not include gauges faintly visible in the background.

 

Defi Advance CAN Driver + Advance BF 80mm Tachometer (White)

part number: DF15702

MSRP: $412

Includes: Advance CAN Driver, Advance BF 80mm Tachometer in White (11k rpm), Power Source Wire, and a few small installation parts.

set-BF80

Contact your nearest authorized TEIN dealer to order!

Defi CAN Driver Gauges

Defi has created a new revolutionary line of gauges! This time, the gauge set is a much more simple installation for OBDII equipped (compatible with ISO-CAN) vehicles.

CAN-DRIVER resize

By using an OBD port harness, the Defi CAN Driver can link up to three gauges, and these gauges do not require the use or installation of sensors/sending units typically supplied with Defi gauges. In other words, you can now display factory engine parameters such as Boost, Intake Manifold Pressure, Tachometer, and/or Water Temperature.

This is the perfect compliment to many newer vehicles that don’t even display such parameters anymore. A lot of cars do away with water temperature readings and simply show you a cold or hot light. And yes, we still manufacture cars without tachometers (for cars that still use internal combustion engines).

CAN Driver was developed on the success of the Smart Adapter series, which is also capable of pulling all engine parameters from an OBDII port. The factory ECU is responsible for all engine function, so it isn’t as if the OE ECU is terrible. It’s the way engine vitals are being displayed on factory gauge clusters that is the biggest problem. As we’ve mentioned in previous Defi related posts, a lot of car manufacturers chose to use as affordable a gauge cluster as possible. That means sacrificing performance (and true readings) for a more aesthetically pleasing gauge display.

The obvious benefit of the CAN Display system is that you no longer have to locate a spot to install aftermarket sensors, or resort to aftermarket adapters like oil filter sandwich adapters, to make them fit properly. The factory sensors are more than adequate. The real problem is either your car doesn’t have these engine readings, or the readings are inaccurate, which many OEM gauge clusters have issues with. To have a properly functioning gauge to provide you with imporant engine vitals can be extremely important, especially to those that have modified their engine for more power. Not being able to monitor items such as pressures and temperatures can lead to detrimental engine failures. Best of all is that this is all plug and play. No need to solder any wiring (unless possibly you’re link the Advance Control Unit- the Control Unit may suggest soldering for power supply), and you can simply unplug all the components within a couple of minutes, if not less.

With the Defi CAN Driver setup, you will have real-time data of your engine’s vitals, and with the reknowned Defi precision and performance they’ve made their name on! Not to mention that Defi gauges give your car a great look!!!

cand_connect1e

The diagram below shows an Advance ZD (DF09701) unit installed. This is only possible by also installing the Advance Control Unit (DF07703) in conjunction with the CAN Driver. The use of Advance ZD is for customers that also want to obtain speedometer using Defi’s system. However, it is not necessary if you only plan to use CAN Driver to power one of the three gauges (Boost, Intake Manifold Pressure, Water Temperature, and/or Tachometer).

cand_connect_ilm_e-600x328

There will be four available part numbers for the CAN Driver series:

DF15601- Defi CAN Driver (msrp $189)

DF15701- Defi CAN Driver + Advance BF 60mm Tachometer set (msrp $377; ***special order part number***)

DF15702- Defi CAN Driver + Advance BF 80mm Tachometer set (msrp $412)

DF15801- Defi CAN Driver + Advance A1 80mm Tachometer set (msrp $447)

 

From there you can add any of the following gauges: Boost, Intake Manifold Pressure, and/or Water Temperature.

For the upcoming new Advance A1 gauges, the applicable CAN DriverĀ  gauge part numbers are:

DF14802 – 2 Bar Boost Gauge (msrp $215)

DF15302- Water Temperature (msrp $215)

 

 

cand_set1

The new CAN Driver series is set to be released in the U.S. in limited supply by the beginning of Summer 2016!