JZA90 Supra Development

Every year a new car release puts us consumers in a tough spot- choosing between a “want” and a “need”. Actually, that’s pretty much the market that TEIN is in. We have a performance product that either a customer simply just wants, or in fact really needs, all depending on what they’re using it for. And for us, just like these new car releases, we have to determine which of our products the customer is going to want, especially for something like the much anticipated new Toyota Supra.

Even on a spec sheet, a stock A90 Supra is a very good package. Of course, as always, the OEM leaves a bit to be desired in many aspects. However, we can see a change in demographic in what they “want” and “need”. Even before the A90 made its way to the consumer, we received inquiries on this platform, mostly with potential owners wanting coilovers. In fact, we got our head start working with Toyota Motorsports as they prepared a couple of A90’s for pace cars to be used at Toyota sponsored events, such as NASCAR races. It was a great opportunity for our in-house engineer to get all the measurements he needs and make a suspension that works well for a pace car, no different than what we’ve done for the Camry pace cars that Toyota Motorsports has worked with us on suspension over the past few years.

Toyota Pace Car

Again, on OEM specs alone, the new A90 Supra is very well equipped. Even though we knew that a “pace car” suspension will never be made as an out-of-the-box setup for our end-users, we had to really think of what, of our products, is the best fit.

A90 Supras have factory electronically controlled suspension. It’s sharing basically all the underpinnings of BMW’s Z4 platform, and BMW technology is found throughout the Supra. So, we know that some consumers are going to want to retain that feature. So first on the list is lowering springs, our S.TECH line specifically.

Next, we knew that coilovers were inevitable. So development on that naturally came next. We’re for sure making a street compliant kit, most likely based around our STREET ADVANCE Z, FLEX Z or FLEX A line. However, the issue is compatibility with the factory electronic solenoids. Much like the FK8 Civic Type R, we’re having to develop our Canceller Units to avoid any issues unplugging these said electronics. This means that the customer can opt for one of our EDFC kits instead of the factory electronics. Yes, that’s an added cost, but our EDFC systems (specifically ACTIVE and ACTIVE PRO) are very advanced and a worthwhile upgrade. Still, we may consider something like our FLEX AVS coilovers which is aimed at Toyotas and Lexus’s using Adaptive Variable Suspension. BUT, this car uses BMW based suspension, and not Toyota’s AVS. So, that will take a bit more time to develop.

On top of making a FLEX type of coilover, we will plan for a more race oriented type setup, most likely around our new MONO RACING coilovers.

Preliminary testing has been completed on production A90’s (the Supra Pace Cars were technically pre-production vehicles, to my understanding). But we’ll still be working on development once other coilover prototypes arrive. So, give us a little time to get these products out!

TEIN 4X4 Dampers

Not necessarily new for us. We’ve actually made 4×4 Dampers in the past, but it was limited to one model and very limited vehicle applications.

Now we’re bringing them back, along with four different models, and hoping to offer them for a wider variety of 4×4 vehicles!

First up is our 4×4 SPORT dampers. These are loosely based on our Type GRAVEL dampers, which are a rebound damping only adjustable (16-way) with ADVANCE NEEDLE technology and ride height adjustable setup. However, this new 4×4 Sports damper setup will incorporate our new Hydraulic Bump Stop (H.B.S.) system, which to date is only applied to our FLEX A line of suspensions. Our proprietary ZT coatings are applied to threaded bodies to provide all-weather ease of adjustment for ride height. Of course, these will be EDFC systems compatible (EDFC II, EDFC ACTIVE, or EDFC ACTIVE PRO). So far, we are making applications for the Toyota Landcruiser and FJ Cruiser.

4X4 SPORT

 

Second is our 4×4 GRAVEL dampers. These are based on our HG setup, which is twin-tube structure with external reservoir, giving you separate compression and rebound damping adjustment (both 16-way) with ADVANCE NEEDLE technology and ride height adjustability. Because these have external reservoirs, we are able to invert the rear dampers for applications such as the Toyota FJ Cruiser, since the nitrogen charge is separated by a floating piston in the external reservoir. Ride height adjustment is smooth using our ZT coatings. Also EDFC systems compatible! Applications are Toyota Tundra, FJ Cruiser, and Landcruiser, as well as the Ford F150.

4X4 GRAVEL
Our third offering is our 4×4 PREMIUM model. This may be a bit more limited in vehicle applications. So far, this has been offered to the Middle East market for the Nissan Patrol/Safari and Mercedes G63 AMG. These are monotube structures with external reservoirs giving independent compression and rebound adjustment. As the name implies, it is a premium line with much more flashy finishing. The damper bodies are also coated with our proprietary ZT coating for superior all-weather performance. However, these also include anodized dust covers all the way to the external reservoir. Quite flashy!

Internally, the monotube structure benefits from our Temperature Control Valve (T.C.V.) technology, which regulates oil flow as temperature and viscosity changes, as well as our Hydraulic Bump Stop system. And yes, EDFC systems compatible for both compression and rebound adjustments.

4X4 PREMIUM

 

Lastly is our 4×4 RALLY model. Technically, these are a made-to-order setup. We’ve applied the rally models to race only vehicle applications. Developed directly from our experience in China Rally Raid (similar to Paris-Dakar rally, if that rings a bell), and taking the most out of our Group N rally program. Features include monotube construction, Temperature Control Valve, Hydraulic Bump Stop, Micro Speed Valve (M.S.V.) technology, High & Low Speed compression adjustment (3-way), and TEIN proprietary coatings. Built to endure some of the toughest racing conditions for 4×4’s. And of course, EDFC systems compatible!!!

The Mitsubishi Outlander PHEV rally SUV you see in our cover picture of this post is on an example of our 4X4 RALLY suspension, as a matter of fact!

Starting at around $20,000.00 (depending on application/use).

4X4 RALLY

So why the re-introduction to 4×4 suspension? Quite honestly there is a huge demand for truck and SUV suspension. While it seemed that sales of such vehicles dwindled off in the mid 2000’s, consumers are saying otherwise nowadays, and that leaves plenty to be desired from the aftermarket. We want to be a part of that trend, and this also helps us to grow our brand. Plus, we have the technology and our heritage in rally racing. We know we can offer a truly unique product for the 4×4 market!

Look forward to updates on our 4×4 suspension program for 2016 within the next few months!!!

Here’s a video of that TEIN sponsored Mitsubishi Outlander PHEV that we found on YouTube:

Quite interesting seeing a hybrid SUV being used for racing!!!

TEIN WATCH ANYONE?

‘Sup guys!  As most of you know we have had  a few new items added to our stock this year. Starting with the new TEIN T-shirts, air fresheners, tire valve caps,  and now our all new TEIN Sport Watch. The watch was designed for a sporty look and to be fashionable for everyday use. As you can, see the watch has our very own TEIN Emerald green on the dial which makes it stand out from a distance. These watches will go fast, so place your orders soon  with your nearest authorized dealer!

The watch features:

-Water resistance up to 30 meters

-Adjustable bezel

-Modern band for comfortable feel