If you’ve been following the Sparco Rally xD team as much as we have, then you know that they have consistently placed podium finishes. As of the Oregon Trail Rally (May 4-6), they temporarily held 1st in championship points under the 2wd class. Good stuff! That’s not an easy task, mind you!
Consistency is key. If you follow these dudes on Facebook and/or Twitter, you’ll see that they completely rework the car after every event, going down their laundry list of items to check, making sure that all components are good to go or replaced if needed well before the next race. I must add that they run a very tight ship- only a handful of guys working on this car. They not only serve as pit crew and transportation, but I’m guessing also as entertainment for their driver and co-driver Andrew Comrie-Picard and Andrew Wimpey. Geez. That’s a lot of work!
After every three or four events, they normally send their custom HG dampers to us for inspection. In some cases, they go longer without inspection, especially when they quickly have to prep for the next event. As with anything rally, these parts take a beating! In our case, it’s normally exterior coatings that get blasted off by dirt and gravel. Minor concern, i suppose.
Before the Oregon Trail Rally on May 4th-6th, Crew Chief Philip Chase brought in the dampers for a quick check. Surprisingly, nothing to really change on the front dampers.
Jon a.k.a. Sir Smiles-A-Lot Inspects The Front Dampers.
But for the rear, he requested remote reservoir mounting (tank detached from damper body), rather than the external mounting (tank attached to damper body) to give them freedom to reposition the external tank and add some needed clearance in the wheel well. Since that kind of work requires complete damper tear down, we overhauled the rear dampers for them. Now they have the reservoir attached by way of a braided steel hose, allowing them to reconfigure reservoir arrangement (they still keep the reservoir close to the damper body, just upside down and a few degrees in towards the chassis).
Still, even with all this preparation and constant rebuilding, something is bound to go wrong in the world of rally. Case in point- the Susquehannock Trail Rally (June 1-3) proved to be the breaking point for the Rally xD. This time, a fatigued rear twist beam axle gave way, pulling apart the axle and the damper assemblies. Ouch! Seven consecutive events can easily do this to a car and its parts. But seven events is also a long time of service! Seems the xD ain’t no cheapo box, afterall!
Susquehannock is no joke. check out this video showing the driving conditions they face
Fortunately, the break was at the beam. So it looks like they’ll be able to repair the car in time for the next event. Also, it seems that our customized HG rear dampers may be able to be repaired, too! That’s testament to the strong twin tube structure of the dampers that can take a good amount of punishment!
Next up is preparation for Pikes Peak, then off to New England Forest Rally (NEFR). They’ve got some time to knock out repairs.
I wish them the best this season, as these hard-working guys continue to do a great job time and again. On our end, we’ll continue to do the best we can to make sure their TEIN HG dampers are in top working order!
Keep it up, guys!
For an econobox, this Rally xD is one tough shoe!.
There’s some good recap of the events at Rally America’s website
www.rally-america.com
And of course, the dudes at Sparco Rally xD keep their blog up-to-date!
www.rallyxd.com
You can also follow them on Facebook (Rally xD) and Twitter (@RallyxD)! Oh, and you can follow us on Facebook, too (TEIN USA, Inc.)!
P.S.- if you were to look up the Finnish term “Sisu”, I’m almost positive that you’d find a picture of the Rally xD team. Look it up!