EDFC Active Has Hit the U.S. Shore!

Posted on by

We’re glad to see the production units of EDFC Active hit our TEIN USA warehouse! Well, actually, it is a production kit we will be using for a test car so we can try it out for ourselves. In any case, glad to finally get our hands on it and play around with different settings and stuff.

Below are some pics that we took of what comes inside the box.

EDFC Active Controller Kit:

The Controller Kit will be packaged with the Control Unit, Power Supply Filter, Two Driver Units, EDFC Motor Cable, Power Cables for the Front and Rear Driver Units. It will also include some necessary installation pieces like Double-sided tape, Zip ties, Branch Connectors, EDFC Hex Screws, and a few other parts.

EDFC Active Production Kit 007 (Custom) EDFC Active Production Kit 008 (Custom)

After getting past the outer box, which is how we ship it out, you’ll find the actual box for the EDFC Active Controller Kit

EDFC Active Production Kit 009 (Custom) EDFC Active Production Kit 016 (Custom)

 

This package contains the Front and Rear Driver Unit Power Cables, Zip ties, EDFC Hex Screws, Branch Connectors (T-taps, as it may be referred to), and a few other install items.EDFC Active Production Kit 018 (Custom)

 

This is the Front and Rear Driver Unit (which the EDFC Motors plug in to), EDFC Active Control Unit, and Power Supply Filter.

EDFC Active Production Kit 021 (Custom)

As you can see, the Driver Unit has the plugs for its own power source to power the EDFC Motors as well as connectors to each EDFC Motor (2 motors per Driver Unit).

EDFC Active Production Kit 022 (Custom)

This is the Power Supply FilterEDFC Active Production Kit 023 (Custom)

This is the EDFC Controller which features all the functions for setting damping to your preference for incremental G-force load. With the optional GPS kit, you will be able to set damping setting increase/decrease based on the vehicles rate of travel (speed). It has a host of other features in such a tiny package.EDFC Active Production Kit 024 (Custom)

The Backside of the EDFC Active Controller has a relief to place the cable, should you need to mount it in a specific fashion that needs the cable to run from either side or below the controller.

EDFC Active Production Kit 029 (Custom)

The optional GPS Kit will come as a small package, too. Basically, it is the sensor and cable as a unit, along with some double-sided tape and serial number.

EDFC Active Production Kit 001 (Custom)

The GPS Unit is physically small. In all, we’ve tried to make the EDFC Active as discrete and unobtrusive a package, so as not to detract from the vehicle’s interior and create excess bulk.

EDFC Active Production Kit 003 (Custom)

We will do a follow-up post once we get this on a test car to give you our evaluation!