As we have all seen and followed the inflation for Importing Products is quite high at this moment which is forcing us to not be able to have these in stock.

Unfortunately we are hit by the same issues that every company is experiencing at this moment. We will regrettably be holding all SuperPro stocking order but will be ORDERING SuperPro as Special Orders Only. Meaning that we will still be placing orders with SuperPro for all your orders but will take about 4-8 weeks to receive in and all orders have to be paid in advance, and no cancellations.

These bushings are designed to last longer from other manufacturers bushings since these come with double helix,bullet and knurling grooves.

The double helix provides a region for grease to travel along. This allows a boundary layer of grease to form between the inside diameter of the bush and the outside diameter of the tube. The double helix is extremely successful in greaseable shackles as the grease can travel from the center of the bush along the helix and out to the grease grooves in the head of the bush.

Knurling is used on control arm bushes to enable unrestricted pivoting of the polyurethane bush around the crush tube. The knurling has two inherent design advantages. The knurling reduces the surface area of polyurethane in contact with the crush tube. This reduction in surface area results in less frictional forces being developed. The Super Pro knurl bore combined with the integral grease retention lips keeps the lubricating grease intact for the life of the bushing, and eliminates the necessity for periodic re-greasing.

It’s definitely worth the small wait time.

Of course if you do need these in a RUSH we can also offer an Expedited Shipping quote upon request.

Please check out the following link to place any orders or to see their Online Catalog.

http://www.tein.com/products/superpro.html