TEIN Japan testing Honda CR-Z

Posted on by

The new Honda CR-Z has been immensely popular in Japan with tuners and consumers alike (there are even rumors about a CR-Z one make race series). All of the big manufacturers have at least one as a demo car including TEIN Japan.

TEIN was one of the first companies to release a coilover for this car and you might think we would release a BASIC or Super Street damper but Japanese consumers wanted Mono FLEX coilovers. So that is what we produced.

Here is a video of TEIN Japan R&D department testing the TEIN CR-Z at Sodegaura Raceway in Japan.

cr

N1 Racing parts on a street driven Civic Si Sedan

Posted on by

Mike of Evasive Motorsports has successfully been using our Mono FLEX coilovers on his street/ track Civic Si Sedan. The car has finished well in the last few events (class win at Super Lap Battle Finals 2009 and class win at Redline TA 2010 Rd.1) and Mike wants to keep it that way. Mike already added a larger diameter sway bar and a revalve but still wanted more vehicle rotation. So Mike and our engineer agreed the next step was to try some parts from our N1 race kit.

The parts arrived last Friday and Mike brought the car in a few days ago for us to install the parts and perform the needed revalve to make it all work.

The N1 kit is used on many cars competing in Japan’s Civic One-Make race series. Normally these cars use spring rates of 20kg front and 26kg rear. Modifications are very limited to keep the racing tight.

We ONLY used a few of the parts from an N1 kit:

N1 pillowball rear spring seat, Special 20kg rears springs, N1 HAS (Height Adjustment System)

The N1 pillowball rear spring seats are NICE (you can see that the top section can pivot). The spring can now better match the travel radius of the lower control arm and allows the use of a straight spring which are readily available in various sizes and rates. Normally a barrel shaped spring is used for more spring stroke but alternate spring rates are not available.

To make this all work we needed to change the stroke and damping force of the rears dampers. Then in order to balance the car front to rear we increased the front spring rate to 16kg, shortened the stroke, and increased the damping force.

The end result is very aggressive spring rates, short suspension travel and race car like handling. When we took the car out for a test drive on local roads and highways the ride was surprisingly smooth. A passenger would never guess that the car has such high spring rates. The car is firm but not bouncy. It absorbs the bumps well and settles quickly for optimal grip.

A few more pics of the Civic Type-Rs TEIN sponsors in Japan. These cars look so good with just livery and being slammed.

2009 Mitsubishi Lancer GTS

Posted on by

S.Tech Spring testing on the 2009 2.4L Mitsubishi Lancer GTS has been completed.

The S.Tech Springs Part # SKE20-AUB00, which have been available for other Lancer models, are now approved for use on the GTS as well.

The ride height drop for the Lancer GTS: Front -51mm and Rear -30mm

The actual drop may vary by models due to the weight of different components (ie Transmission, Packages, etc.)

You too can have an aggressive drop that changes the image of the entire car, at a cost that won’t hurt your wallet. Contact you local Tein Dealer. http://www.tein.com/dealer_list/index.html

Coilovers for 1st Gen Integra & CR-X / 3rd Gen Civic

Posted on by

TEIN Authorized dealer Heeltoe Automotive specializes in Honda/ Acura tuning and asked TEIN to produce a coilover kit for the ’84-87 Honda CRX/ Civic and ’86-89 Acura Integra. The result is called the Medieval Pro Coilover Kit exclusively sold by HeelToe.

All product development was performed in our HQ in Downey CA and the kit is manufactured in our Yokohama Japan factory.

The kit has features similar to our Super Street coilovers. 16-way damping force adjustability with a ride height adjustable rear. The front suspension retains the standard torsion beam from Honda. Heeltoe allows customers to pick the TEIN rear spring rate and also offers different diameter torsion beams for the front.


Additional stock of these limited edition coilovers is now available through HeelToe. Please visit Heeltoe’s website at, www.heeltoeauto.com for additional technical information or to place an order.

A look inside TEIN USA HQ in Downey CA

Posted on by

TEIN USA has two locations in the US. Our headquarters is in Downey, CA and our East Coast facility is in Norcross, GA.

A small showroom filled with samples of all the brands we carry. TEIN USA is the exclusive US distributor for DEFI, Fujitsubo, Carbing, and SuperPro. We also distribute Takata and Auto-Tech Interiors (ATI).

A look at the front office where most of the day-to-day operations are taken care of.

A typical desk and staff multi-tasking.

Service area where dampers are repaired or overhauled. One of our technicians hard at work. You can see the NMB shock dyno in the corner and a few of the repairs being processed in the foreground.

One of the many aisles in the warehouse. S.Tech springs can be seen on the left, various coilovers on the right and some Fujitsubo at the very end.

This is the section of our warehouse where we prepare products for shipping and house smaller items.

A few of the project cars (Elliott’s EVO X, Import Tuner 370Z, TEIN Mustang) we are either working on or temporarily storing for upcoming events.

The Import Tuner/ TEIN Lexus ISF sitting in the back of the warehouse. Look for a feature on this car in an upcoming issue of Import Tuner. This thing makes over 510WHP and 550 ft-lbs of torque with the help of a wet NOS kit.

Video of Vaughn Gittin Jr’s drift Mustang at Long Beach

Posted on by

Awesome video of Vaughn Gittin Jr at Formula Drift – Long Beach. You can see the dual EDFC controllers mounted in the dashboard. ASD did an awesome job building this car in a short time. Everything about the car is all business especially the interior – So fresh and clean.

Vaughn Gittin Jr: Monster’s Street Fighting Man from Drift Alliance on Vimeo.

Formula Drift Rd.1 Winner Vaughn Gittin Jr.

Posted on by

TEIN would like to congratulate JR Gittin for winning Rd. 1 of the 2010 Formula Drift Championship. Even more impressive is that this was the debut event for JR’s new ride which is the Monster Energy/ Falken Tire 2011 Ford Mustang built by ASD and featuring TEIN 2-way coilovers with dual EDFC.

JR unveiled this car on Thursday night at a special Falken FD pre-party at Rod Dyrdek’s Fantasy Factory in Downtown Los Angeles.

TEIN does not produce an off-the-shelf 2-way kit for the Mustang so the kits on JR and JTP cars’ are from our Specialized Damper program (SPD). The SPD program allows any customer purchase a made to order kit from our Yokohama, Japan factory.

TEIN was out at Rd. 1 in Long Beach with a small booth. Thank you to all the people that stopped by to say hello and purchase some TEIN goods.

Special thanks to Marc M. of Auto-Tech Interiors for the action pics of JR’s Mustang.

Specialized Damper Program

Posted on by

Although this isn’t the latest offering from TEIN, it is a fairly new program now offered by TEIN USA.

The Specialized Damper Program allows customers to design a one-off kit built to their specifications. Click HERE to link to TEIN Japan’s Specialized Damper Program page.

With a wide variety of options available for the customer to choose from, we are able to create a kit unique to each customer’s request. Options include, but are not limited to

  • Twin-Tube or Monotube construction.
  • Pillowball Upper Mounts(Optional camber adjustment on MacPherson Strut-type), if applicable.
  • Custom Coil Spring for non-height adjust kits.
  • Use of new steel components or reuse of OE steel components( OE spindles may be required if integral to the OE strut)

and many other options.

OE suspension design may be the only limiting factor( we base the design strictly off of the stock mounting points). So this may exclude the use of a coil-over type dampers, pillowball upper mounts, custom leaf or torsion spring, etc.

Lead time to have such dampers made may vary, depending on the options, complexity, as well as the manufacturing schedules of TEIN Japan (all suspension components are manufactured and assembled in our Yokohama plant).  Expect an ETA of 3-4 months from start to completion of manufacturing (excludes shipping ETA).

Here are a few examples of damper kits requested by a few customers.

KPGC10 Skyline 2000 GT-R

Lancia Delta Integrale

Kia Forte

Hopefully this opens up a new set of options for you, should you not find what you’re looking for.

If you have any questions, please do not hesitate to give us a call!

A look back at US Drifting – Part 2

Posted on by

From 2003 to 2009 TEIN USA supported the following cars/drivers:

TEIN 350Z – Murao                                                              TEIN/ OS Giken S14 – Murao

TEIN JDMRice S13 – Murao                                                  DRFT FD3S – Utsumi

DRFT S13 – Utsumi                                                              Team Falken S13 – Koguchi

Team Falken S14 – Yamamoto                                            Team Rotora S13 – Ken Gushi

Team Rotora S13 – Ernie Fixmer                                         Team Falken S13 – Gittin

Team Falken/ Discount Tires – Young                                 Team Falken EF – Hatakeyama

Team Falken Camaro – Hampton                                         Team Falken FD3S – Yamamoto

Team Falken FD3S – Angelo                                                Team Falken G35 – Wan

Team Falken Mustang – Gittin                                              Team Falken S15 – Forsberg

Star Girl Racing S13 – Mei                                                   Team X Mustang – Beckford

Honda R&D Element – n/a                                                    Milano Auto – Kregorian

Team Falken/ Discount Tire IS300 – Sumida                       Team Falken/ NTB RX-8 – Yamamoto

Team Falken/ Boso Garage S13 – Petty                              Team Falken Sky – McNamara

Team Falken 350Z Convertible – McQuarrie                       Team Falken 2010 Mustang – Pawlak

Monster/ Team Falken  2011 Mustang – Gittin

Ross Petty’s ride back in 2007 which used custom valved Super Drift coilovers.

Falken IS300 from 2007 which was driven by Hiro Sumida. Utilized mono tube TEIN coilovers and EDFC.

2008 Falken Sky driven by D-Mac. Using TEIN Super Street coilovers and EDFC.

2009 Falken 350Z convertible driven by Tyler who finished third overall in FD last year. Utilizes a Super Racing coilover kit with custom valving and dual EDFC.

2010 bodied Ford Mustang driven by JR in 2009. TEIN 2-way coilovers and dual EDFC.

For the 2010 FD season TEIN will be used on 4 Falken drift cars which include:

Falken Sky driven by D-Mac

Falken 350Z Convertible driven by Tyler

Falken 2010 Mustang driven by JTP

Monster Engery/ Falken Tire 2011 Mustang driven by JR

Import Tuner Magazine with Lana Lopez

Posted on by

Be on the lookout for the June issue of Import Tuner magazine which features the Import Tuner project 370Z and cover model Lana Lopez. Chief editor Carter Jung finished up the photography at TEIN USA and the pics were awesome. Import Tuner is also putting together a video featuring an interview with Lana, check for that at www.importtuner.com

Co-cover car is the 370Z which Tyler McQuarrie drove at the Super Lap Battle finals to a third place finish in the Street FR class. An outstanding result considering this was the first time the 370Z had ever been on the track since the twin Turbo kit, TEIN Mono Flex coilovers,  Project Mu BBK, Volk TE-37, Sunline Racing aero amongst a host of other parts were added to the car.

Tyler McQuarrie on the way to running a 1:59.829 at ButtonWillow Raceway Config #13.

One of the many pit crew members for the 370Z – TEIN Engineer, Ryoh Takizawa.

You can read the full article on the 370Z build and tuning in the latest issue of Import Tuner magazine.