2022 Subaru BRZ Products

Featured

Posted on January 21, 2022 by Paul P.

We’re glad to report that, for the most part, existing coilovers for the Subaru BRZ will in fact work fine with the latest 2022 BRZ body style (ZD8 chassis code).

So, we’re listing our FLEX Z (VSQ54-CUSS4) and FLEX A (VSTD8-D1SS4) as compatible for both first and this second generation BRZ.

However, our STREET BASIS Z, STREET ADVANCE Z, and our S.TECH & HIGH TECH lowering springs will have new part numbers.

As to why our existing FLEX Z and FLEX A coilover lines are still compatible- the spring rate and valving work very well on the new platform. But, these coilovers are a bit more aggressive than the STREET BASIS Z & STREET ADVANCE Z lines. Therefore, we’ll have to determine what changes we’ll need to make for these kits. As well, our S.TECH & HIGH TECH springs will be unique for this car due to different lengths and spring rates.

The only issue now, really, is the supply chain, as we’re still experiencing massive delays in imported goods from Japan.

Currently, the FLEX Z and FLEX A coilovers have an eta of late February 2022, while the HIGH TECH springs have an eta of April 2022.

Please visit our Product Stock Page for more information.

HIGH TECH Lowering Springs (SKAEA-G1B00) shown

New Products and Developments

Posted on August 31, 2021 by Paul P.

With this COVID-19 pandemic throwing us all a helluva curveball, we find ourselves in a very fortunate position to continue our pursuit in bringing some of the best products we can for a wide variety of vehicle applications! We’re continuing to grow, and we couldn’t be happier!

As mentioned, the pandemic wasn’t what we were expecting. In fact, it was quite the opposite of what we were expecting- low to no business, extended lock downs, as well as possibly having to temporarily shut down our operations if things really got worse for all of us.

But, being an automotive parts manufacturer and distributor kept us fully operational ever since we had our lock downs. We have just been very fortunate that COVID-19 has not affected our staff directly. However, the same cannot be said for our parent company and our two factories. Our manufacturing facility in China had to shut down relatively early on in the pandemic. Japan is facing new lock downs due to the spread of the Delta variant. We’re only hoping that, with everyone doing their part, we won’t be faced with harsher lock downs and restrictions.

With that, we’re still facing some struggles. The supply chain has been greatly affected in all aspects and in all industries, and we’re just now catching up on a lot of backordered items for our customers. Freight costs have soared tremendously, not to mention extended transit times or delays for shipments. But yet, we still are trying our best to continue with product development while still being able to service our customers.

So, while we’re still technically trying to catch up, we’ve worked hard to come out with new vehicle applications and broadening our ENDURAPRO & ENDURAPRO PLUS line to reach the European vehicle market, and to-date we’re proud to see this line flourishing. But of course, our coilover lines, our bread and butter if you will, continues to grow as well, with new vehicle applications being added on nearly a monthly basis.

ENDURAPRO Shock Absorbers for BMW X3 and X4 now in stock.

ENDURAPRO Shock Absorbers for Toyota RAV-4 and Lexus NX200t now available.

ENDURAPRO Shock Absorbers for Tesla Model 3 AWD now available (different part numbers RWD Model 3’s also available)

S.TECH Lowering Springs for Tesla Model 3 RWD and AWD available (AWD springs shown.

MONO RACING Coilovers for Nissan GT-R (R35) arriving soon.

Unfortunately posting all the new vehicle and product applications we now have would make this post long-winded and quite boring. So we ask that you please check out our website and search around for what’s new from us!

Also, if it’s more convenient for you, you’re also free to email us at tus_sales@tein.com, or give us a call at 562-861-9161, and we would be glad to assist you in finding products for your vehicle.

TEIN ENDURAPRO/PLUS SPRING KIT

Posted on December 18, 2020 by Paul P.

High Performance Premium Shock Absorbers and Lowering Springs

Although we’re well-known mainly for producing coilover kits, the ENDURAPRO and ENDURAPRO PLUS shock absorber line is gaining more momentum stateside. While much more popular overseas, our premium replacement shock absorbers are starting to generate interest in a lot of consumers, especially if you’re on lowering springs and are looking for suitable performance shocks to pair with them, or you simply don’t want to invest in a complete coilover kit.

At the launch of the ENDURAPRO/PLUS line in the U.S., we also launched the ENDURAPRO Spring Kit and ENDURAPRO PLUS Spring Kit, which pairs our S.TECH lowering springs along with either of the shocks, depending on if you want fixed damping setting or 16-click adjustable damping.

Let’s take a look at what’s included with a ENDURAPRO Spring Kit (part # VSQ54-A1SS2) for the FR-S/86/BRZ.

Conveniently packaged, springs are placed over each shock absorber to minimize packing space and package dimensions. Quite honestly, there isn’t much to it. For certain vehicle applications, other components may be included, such as dust boots or bump stops. Although the ENDURAPRO/PLUS shock absorbers utilize our internal Hydraulic Bump Stoppers (H.B.S.), you will still need to retain either a OEM or TEIN bump stop, which is used as a precautionary measure.

Springs packaged over shocks to minimize packaging size.

Hard to tell from the photo, especially when it’s not lined up against an OEM or OEM replacement shock absorber, but our ENDURAPRO/PLUS shock absorbers are much larger in diameter to and OEM/OEM replacement. In fact, it really is just like one of our coilovers, just minus the threaded adjustment for ride height.

Valved to provide far better handling performance, our ENDURAPRO/PLUS shock absorbers are a perfect enhancement for an otherwise stock vehicle. However, paired with one of our lowering springs and you have a much more sporty ride that you can appreciate. We recommend this type of setup for customers who can do without ride height adjustability or pillowball upper mounts (although it may be compatible with some aftermarket pillowball mounts). That just means less maintenance (you are periodically inspecting your suspension, aren’t you!?!?!?!).

Currently our part numbers for ENDURAPRO Spring Kits and ENDURAPRO PLUS Spring kits are rather limited. However, we’re also still working on either developing performance replacement shocks or lowering springs for certain vehicle applications. If you have any questions about these products, please feel free to contact us at 562-861-9161, or reach out to any of our authorized dealers!

Merry Christmas from TEIN USA!!!

Posted on December 23, 2019 by Paul P.

From all of us at TEIN USA, Inc., we want to wish everyone a Merry Christmas!

We’ve been very fortunate to continue a successful growth in the U.S., even with tariff increases due to the U.S. and China trade squabble. If anything, this only strengthened our sales for items coming from our Yokohama, Japan factory! Still, our TEIN China factory has continued to produce our STREET BASIS Z & STREET ADVANCE Z, as well as our ENDURAPRO & ENDURAPRO PLUS shock absorbers for a global market, and we couldn’t be happier with the demand for our products around the world! At any rate, we’re continuing to pursue manufacturing the most reasonably priced suspension package at the TEIN high-quality levels our customers are all aware of, and we thank each and everyone of you for helping us achieve those standards year after year!!!

Just to let you know, TEIN USA Operations will be closed on Christmas Day (Wednesday, 25th). But, we will be open Christmas Eve (Tuesday, 24th) and after Christmas! So, whether you have questions about new products for your car, overhaul/revalve, or just want to give us some company during those days, please feel free to give us a call!!!

Once again, Merry Christmas, and we hope Santa puts a new set of TEIN coilovers or lowering springs under your Christmas tree this year!!!

2017+ 86 & BRZ FLEX Z, FLEX A, & MONO SPORT Coilover Testing

Posted on June 28, 2017 by Paul P.

We just finished up some testing on the 2017 Subaru BRZ (and which would of course affect the 2017 Toyota 86). While the vehicles aren’t drastically different compared to 2012-2016 model years of the aforementioned vehicles (the 86 previously named the Scion FR-S), there are some small changes in suspension that affect how our existing coilovers feel.

TEIN Japan currently sells part numbers VSTD8-C1SS4 for the FLEX Z line, VSTD-D1SS4 for the FLEX A line, & GSTD8-71SS4 for the MONO SPORT line for their market.

Stateside, we currently sell the VSQ54-C1SS4 for FLEX Z and GSQ54-71SS1 for the MONO SPORT line. For the FLEX A, we previously sold the VSQ54-D1SS4 model number. Now we sell the VSTD8-D1SS4. For the MONO SPORT line, we’re looking to start selling TEIN Japan’s GSTD8-71SS1, since there isn’t much variation between the U.S. and JDM spec.

Phew, that’s a lot of part numbers…..

So, why the change to FLEX A part number VSTD8-D1SS4?

The reason is that there are a lot of similarities between the U.S. part numbers for FLEX A and FLEX Z. If you’re not familiar with either, we’ll just say that the FLEX A includes our proprietary Hydraulic Bump Stop (H.B.S.) and is also a serviceable damper (can be rebuilt/revalved). In terms of cost, the FLEX A is $210 more.

Since the features are really the only noticeable difference, we had to look at damping force between the JDM and US kits to see what would work best for our market. The U.S.-spec FLEX A and FLEX Z both had very similar damping characteristics. Aside from the H.B.S. setup in the FLEX A’s, they feel nearly identical.

With that said, we wanted there to be difference between the two kits. Something that will help differentiate the two when a customer decides what they’ll be using the kit for.

So, we recently started offering the newer part number of FLEX A, the JDM version, part number VSTD8-D1SS4. These actually have a difference in damping, being more aggressive. We feel this may end up being a better option for the more-than-occasional track driven car owner. Being a serviceable damper, this also will allow owners the ability to revalve the dampers for different spring rates, if necessary. Along with being slightly more aggressive, the damping adjustment range is shifted up slightly, giving the end-user a higher range of tuning flexibility at the track.

That’s not to say that the FLEX Z isn’t at all capable of track use. However, we wanted this setup to offer greater compliance for a daily commuter, while still having an available adjustment range that allows for much more sportier handling characteristics. Comfort was just more of our aim for this kit, and it is greatly noticeable on larger bumps as high-speed compression is softer and more forgiving.

FLEX Z and FLEX A coilovers will look nearly identical. But, as mentioned in this blog, there are some features that FLEX A has over the Z line: Hydraulic Bump Stop, serviceable dampers (rebuild/revalve), and slightly more aggressive valving out of the box.

So, as far as a total breakdown of each suspension offering we have for the FR-S/86/BRZ:

STREET BASIS Z (GSQ54-8USS2)– perfect for daily driver not looking to sacrifice OE ride feel but improve handling performance, while being ride height adjustable.

FLEX Z (VSQ54-C1SS4)– high performance street kit, with 16-click damping adjustment and included upper mounts (camber adjustable for front).

FLEX A (VSTD8-D1SS4)– higher performance street kit/occasional track kit with aggressive damper valving, but with a greater adjustment range for ease of tuning. Included Hydraulic Bump Stop (H.B.S.) providing greater control and damping stability against repulsive compression force. Includes upper mounts as well (camber adjustable for front).

MONO SPORT (GSTD8-71SS1)– entry-level race setup with single adjustable damping. Monotube internal structure with greater oil capacity for better endurance and performance for long track stints. Also utilizes are Micro Speed Valve (M.S.V.) to improve low-speed damping curve. Includes upper mounts as well (camber adjustable for front).

SUPER RACING (DSQ54-81LS1)– 2-way damping adjustable setup for dedicated track cars, suitable for cars with R-compound or softer tires. Lightweight (full aluminum rear damper assembly), and included duralumin upper mounts (camber & caster adjustable for front) and camber washers for front.

Hopefully this info helps. If not, you’re more than welcome to give us a call to discuss your suspension options!

Test Cars Needed at TEIN USA!

Posted on December 8, 2016 by Paul P.

Since we’ve been working hard to release the latest suspension kits for 2016, we’ll always run into one hurdle in trying to get the newest products out to the consumer. Finding the correct vehicle for testing is one of those hurdles.

We (TEIN USA) have always done our product development in our Downey, CA. facility for products destined for the U.S. market. The fact that all of our tools and testing equipment are in this facility, and also because our relative distance from TEIN Japan, makes it easier to communicate with our engineers overseas on a daily basis.

However, this type of convenience makes it difficult to locate local vehicles since we’re working in a relatively isolated area. Some times the vehicle we need is more popular in the Northwest region, or even the East coast region. Some times the vehicle we need has been out of production for a number of years already, so finding one type of vehicle can have its challenges.

So this is where we turn to our customers for help!

If you are in or near the L.A. county, and can leave your car with us for a few days of product testing/developing, it would be greatly appreciated! This type of assistance from you doesn’t go without some type of reimbursement. Of course, we want your car to look and handle great, which is probably why you’re reading our blog right now. So, we typically give our customers free product for the inconvenience of leaving them without a car (assuming you only have the one car) for our testing purposes.

If you have any of the vehicles listed below, and want to work with TEIN in developing suspension, please give us a call! We’d love to work with you!

Vehicle requirements:

-Must retain OEM body (no widebody kits, aftermarket fenders, bumpers, side skirts, extended bumper lips).

-Must retain factory interior. There may be exceptions for some aftermarket interior parts.

-OEM wheels (and tire size) preferred. Plus sized wheel and tires may be fine, depending on size. No aggressive widths and offsets. Contact us if you have aftermarket plus sized wheels.

-Must retain OEM suspension (stock springs, shocks, upper mount assemblies, bushings, swaybars, endlinks, etc.). There may be exceptions for some aftermarket suspension components.

-Must have valid registration and tags, and proof of insurance.

*consult with TEIN staff if your vehicle may have questionable modifications/parts.

Loan requirements:

-Vehicle testing schedule may be from 3-5 business days. In other words, the car will need to be left with us during the scheduled/agreed time frame.

– Vehicle must be dropped off with a full tank of gas. We will be return vehicle with a full tank of gas.

Give us a call at 562-861-9161!
Or, if email is more convenient, send your inquiry to tus_sales@tein.com

Inside Ryan Millen’s Workshop

Posted on August 22, 2016 by Paul P.

While Ryan Millen and his team are busy and en route to their next event, Gorman Rally, we went to his shop to take some measurements of our dampers, which we recently finished up for them and are now installed onto his other RAV-4.

Here are a few pictures of the car while it was on jackstands:

Still some final prep before this car goes into its next event.

We needed to take a few measurements of the dampers installed, as well as check the settings.

Kind of surprised to see OEM disc brakes and sliding calipers on a full-fledged rally car. Then again, this probably is a great testament to the factory equipment.

Rears were harder to get a good look at, since they’ve buttoned everything up, including gravel guards.

Kind of hard to not get distracted in this shop. I mean, its filled with race cars and parts. Rod Millen (Ryan’s father) has his old Pikes Peak Tacoma. That kept getting my attention!

TEIN STREET BASIS Z & STREET ADVANCE Z Has Landed!!!

Posted on May 13, 2016 by Paul P.

We’ve been on a full-fledged effort to bring the consumer affordable, high quality suspensions. After all, this is the reputation that TEIN has built its successes on. At the end of 2015, we introduced the new FLEX Z suspension kits. Never before have we released a full featured coilover kit at under $1000 (FLEX Z starts at $800), and to our surprise, it has taken off better than we have expected. So much so that our biggest problem is keeping enough inventory of these kits on our own shelves, let alone our dealers’ shelves.

With this success, we still felt it necessary to address the demand for even more affordable suspensions, which is where our new STREET BASIS Z and STREET ADVANCE Z suspensions come in. These kits come at a starting price of,,,,, brace yourselves for this,,,,,, $450 for the STREET BASIS Z and $550 for the STREET ADVANCE Z. That’s not for two shocks, or just the coilover springs. These are the starting prices for the complete kit!

You may be asking “HOW IS THIS POSSIBLE?”.

Good question! Let us explain:

A couple of years ago, we made mention of our new TEIN China factory. Now fully operational, we’ve been able to get to work on these two new lines of suspensions. Our goal was to maintain the renowned TEIN quality that TEIN Japan has prided themselves with and bring this technology overseas. In doing so, we were also able to meet our goal of offering an even more affordable suspension kit.

How do these two new “Z” line of suspensions differ from existing STREET BASIS & STREET ADVANCE lines?

STREET BASIS Z/STREET ADVANCE Z will still go through our patented surface treatment processes, the very same processes our existing suspension lines go through, providing excellent corrosion resistance and many years of service.

The only major difference is the fact that the new STREET BASIS Z and STREET ADVANCE Z lines use fully sealed dampers (non-rebuildable) and are made in TEIN China’s factory (as previously mentioned). Our new fully sealed dampers may not be able to be rebuilt and revalved since the damper bodies can no longer be fully disassembled. However, in terms of servicing the dampers, should a damper go bad after our 1-year warranty, the customer can simply purchase a replacement damper and swap over their original TEIN spring and factory upper mount assembly and get their car back on the road.

Fully sealed dampers may not be able to be rebuilt/revalved, but it still makes your suspension kit much cheaper to own in the long run when it comes to replacing old damper units. Instead of sending in your dampers, simply purchase replacements and get your car back on the road quickly!

Why is this of any benefit to the customer? Well, now you no longer have to send your dampers in to be rebuilt. That translates to less downtime (typical overhauls take anywhere from 3-4 weeks currently), and actually a much more cost-effective way for a customer to get their car running again (no need to ship dampers to and from TEIN USA, and replacement STREET BASIS Z/STREET ADVANCE Z dampers cost anywhere from $80 – $120).

STREET ADVANCE Z kits starting at $550. Ride height and damping force adjustable.

Although not much else has change with the introduction of our new STREET BASIS Z & STREET ADVANCE Z kits, we’ve done our best to give the customers more ride height adjustment range, offering lower ride heights than before. We’ve also reassessed some vehicle applications and revised spring rates and valving to provide even greater performance and comfort.

The first sets that have arrived are limited in vehicle applications, but we’re working on eventually adding more and more applications of STREET BASIS Z & STREET ADVANCE Z as the year progresses. In the meantime, however, we still have some current STREET BASIS & STREET ADVANCE coilovers at new, lower retail prices. So there’s still plenty of chance to get a high quality TEIN coilover at a great price!

Before the new STREET BASIS Z and STREET ADVANCE Z kits start leaving our warehouse, we just wanted to say thank you to all of our authorized dealers, as well as our customers, who have helped TEIN to continue bringing technological innovations in the high performance segment of our market. Without your support, we wouldn’t be able to make our living in providing you with pure driving pleasure!

Please visit www.tein.com to see the available applications!

TEIN Has Two Manufacturing Plants?!

Posted on March 11, 2015 by Paul P.

That is correct!

Earlier in 2014, we posted about the new TEIN China manufacturing plant, which construction of the plant was completed before the end of the year. This new plant will be focusing on production of our upcoming line of performance replacement dampers. YES, we will finally be working on replacement dampers designed to work with factory springs, as well as our S.TECH & HIGH TECH lowering spring kits! We’ll blog more on this product later.

However, this will not be the first manufacturing project for TEIN China. We’re going to be receiving our new STREET BASIS Z & STREET ADVANCE Z damper lines from the TEIN China plant.

If you had read our previous posts regarding the new “Z” line, you’ll notice that the other Z line of dampers, our FLEX Z coilovers, will be coming from TEIN Japan. Why is that?

TEIN Japan’s Yokohama plant. This new facility was opened in January 2014.

It’s a little difficult to explain. But, in short, TEIN is still a very proud Japanese brand. In fact, many of TEIN’s domestic customer base prefer a Japanese manufactured product, especially more of the high-end kits we offer. So TEIN Japan will still continue to produce some of our higher end product lines, such as the upcoming FLEX Z & FLEX A, MONO SPORT, SUPER DRIFT, HG, SUPER RACING, GROUP N., and several other product lines.

That is not to say there is a lack of pride for the TEIN products coming from the TEIN China plant. In fact, we have invested a lot of money into this new plant in an effort to maintain the same TEIN quality our customers know and expect out of every product. Even machinery and equipment used in TEIN Japan will be the same in the TEIN China plant. A few of TEIN Japan’s engineers and managers will also be making the move to China, not only to train new staff, but to also control all operations. To us, this is a necessary step in controlling and maintaining TEIN quality.

Maybe this would have been a much easier undertaking if we just outsourced manufacturing of these more affordable coilover kits through some other Chinese or Taiwanese manufacturer. Sure, but that isn’t the TEIN way. We’re proud of our technology. Again, we’re not claiming to have invented dampers. We’re just proud to make suspension better through our own engineering and through our own technology.

Still though, why the new factory in China?

Our new TEIN China manufacturing plant!

A very good question. For several years now, we’ve faced stiff competition in the market place, especially with a lot of these somewhat engineered suspension kits selling for well under $1000. We’re not trying to defame any particular brand. So in their best interests, we’ll leave that information out. Sorry! We’re not here to bash on anyone!

It hasn’t been easy for us. For years, most of the feedback from our authorized dealers and wholesalers is how TEIN suspension is overpriced, and no matter how we dissected our manufacturing process in trying to reduce cost, it still didn’t gain the appeal for a broader range of customers. We were essentially becoming a boutique brand. We’re hoping that opening a new overseas facility helps to address this matter. Of course, this exploits a certain factor about manufacturing in China- affordable labor. However, we’re not in China to simply abuse this factor and gain in profitability. It is just a simple fact about the country and its economic structure, and this is how other manufacturers are able to price their products well below ours. This new affordability in manufacturing translates directly into a more affordable product for our customers.

It wasn’t an easy decision. In fact, it was an idea that we never knew would come to fruition. We didn’t simply decide to open up a new plant. We’re talking about a problem that hadn’t been addressed since late 2008, during the dreaded global financial crisis. Again, we could have simply outsourced manufacturing. But, fortunately, we were able to hang on and maintain some profitability over the next few years in an uneasy industry. We had to outweigh every factor before we made this decision to grow. Now, it’s set in stone, and the TEIN China plant is just about fully operational.

Many of TEIN USA’s staff share the same regards as all other U.S. consumers when we hear “Made in China”. It clearly doesn’t have the appeal that “Made in Japan” does. Typically, we view Chinese manufactured goods as essentially NOT GOOD. That was just something most of us grew up hearing and reading about. It’s sad. Then again, think about how many other goods come from China… Why is it that China is commonly associated with terrible quality? I think this is something that TEIN plans to dispel. Being that we’re in control of all aspects of this manufacturing plant, we have the opportunity to change that “Made in China” label. We think that, naturally, Chinese manufacturing can improve.

All TEIN suspension products, whether made in China or made in Japan, will be covered with our manufacturer’s warranty. That won’t change. In fact, we’ll continue to offer after-sales service, such as replacement parts and dampers, as well as overhaul service, to all of our customers so that they can continue to use their TEIN suspension for years and years.

The New, More Affordable STREET BASIS Z & STREET ADVANCE Z Coilovers!!!

Posted on February 18, 2015 by Paul P.

As we had already mentioned, development has started on our FLEX Z coilovers, a more affordable offering of our popular STREET FLEX coilovers. But, we haven’t stopped there with new products for 2015!

At around the same time we start bringing in our FLEX Z coilovers (mid-Spring), we should also have a few applications of our STREET BASIS Z & STREET ADVANCE Z coilovers! However, we’re not too sure the timing, as the new STREET BASIS Z & STREET ADVANCE Z will be coming from our newly established TEIN China plant.

The difference between current STREET BASIS and STREET ADVANCE coilovers from the new “Z” line is that the Z line are non-rebuildable coilovers. Again, this follows in suit to the STREET FLEX -> FLEX Z changes. All other features of the two entry-level coilover lines are the same.

STREET BASIS Z is strictly a ride height adjustable kit. This makes it a perfect setup for the daily driver looking for an increase in handling performance without compromising comfort for everyday use. For many of you considering a lowering spring + performance shock absorber combination, the STREET BASIS Z makes even more sense as we select appropriate spring rates and valve our dampers to match. No guesswork on the end-users part in trying to match one brand of springs to another brand of shock absorbers. The added height adjustment feature allows the end-user the ability to adjust ride height to their preference, something that lowering springs lack. Being that most vehicles are slightly unbalanced from left to right sides, that means you can easily adjust the ride height so that each corner is even from their opposing sides.

STREET ADVANCE Z takes the ride height adjustability of the STREET BASIS Z line and adds 16-way damping adjustment. So, not only do you get a matched spring and damper setting, you now have the ability to tune the dampers to meet your driving conditions. Roads seem a bit rough? Soften up the damping. Glass smooth highways? Crank the damping to a stiffer setting. You get all that and everything in between. STREET ADVANCE Z is also compatible with our EDFC systems (some STREET ADVANCE Z coilover kits may require extension kits for compatibility), giving you a completely adaptable suspension kit based on your driving conditions/characteristics! That’s a feature that not even all sports luxury cars have, and our setup is at a much more affordable price!!!

Like the FLEX Z line, these new STREET BASIS Z & STREET ADVANCE Z coilovers have a very appealing starting price! STREET BASIS Z comes in at $400 while STREET ADVANCE Z comes in at $500!!! Those are unheard of starting prices for a TEIN coilover!

And, just like the FLEX Z coilovers, replacement parts will be made readily available! If your STREET BASIS Z or STREET ADVANCE Z dampers start feeling worn, you can purchase replacement dampers! No need to send them into us for a rebuild since these are fully sealed, non-rebuildable dampers! That will save you some money, and most importantly, extended downtime! We’ll help to get your car back on the road as quickly as possible!

Again, the only major difference is that the new “Z” line of dampers are non-rebuildable.

Internally, we continue to use our ADVANCE NEEDLE for increased per-click damping adjustment. This translates into greater damping change for each click of the 16-way adjuster, making it easier to find the perfect damping setting. Our high performance damper oil, the same kind we use in our race dampers (Gr.N, Super Racing, N1) provides excellent anti-foaming and viscosity characteristics under heavy cyclic rate, giving you repeatable damping feel and performance for the life of the damper.

ADVANCE NEEDLE provides wide-range damping force change per click.

Proprietary damper oil exhibits excellent anti-foaming and viscosity characteristics for stable damping force under extended use.

We will still retain our exclusive damper coatings, too. Our shot blasted, zinc plated high strength STKM13C steel damper bodies are treated to our patented 2-layer/1-bake powdercoating procedure. This gives our dampers excellent protection against corrosion in harsh environments, especially in areas with heavy snowfall. Our patented ZT coating is applied to our threaded adjustment tubes (inside and out), and contribute to smooth height adjustment, and outstanding adhesion to the steel threads. This ZT coating will not peel or flake off even after repeated adjustment. This is due to the ZT coatings’ low friction coefficient. Essentially, it acts as a dry lubricant. That makes every external component of the steel bodied damper completely protected from the unforgiving environments we subject them to, and we expect our dampers to perform at their very best year after year after year…

the bare surface of our dampers are treated to a double shot peening adding surface strength and also prepares it for zinc coating.

We’ve also updated our spring seats and seat locks for increased durability under heavy vehicle loads and smooth height adjustment. Instead of using a rubber spring seat, we’ve added a Delrin thrust washer atop the new, wider spring seats.

Coilover springs will continue to be made from cold-wound SAE 9254 Vanadium alloy. After cold winding and setting, we heat treat the springs prior to grinding end coils to proper dimensions. Before powdercoating, we subject every spring to double shot-peening which aids in increased spring life and fatigue strength. Some coilover applications may have application-specific spring windings and shapes, such as our barrel springs or taper springs.

We will also continue to provide our 1-year warranty against manufacturer’s defects. Even at this new starting price, we will stand behind our products!

So now you’ve got the highest available quality and performance at an extremely low price, and backed with a manufacturers warranty. Unfortunately, we still haven’t made it easier for you to decide with TEIN suspension system you want. So we ask you to please give our sales staff a call at 562-861-9161 for assistance in getting you into the proper TEIN suspension kit for your needs!

TEIN USA Blog

The latest news and info from TEIN USA

Tag Archives: Dampers