J T Motoring’s FR-S Build

One of our good friends, Brian Hung from J T Motoring out in Massachusetts, has made a name for himself bringing JDM tuning to New England. His latest build for 2013 is this beautifully crafted Scion FR-S.

IMG_3349 (Custom)

When Brian, contacted us, you can already guess that he needed a suspension solution. We were fortunate enough to be one of the first coilover manufacturer’s to have something readily available for the new FR-S, and for Brian, it was a no-brainer to step up into the Type Flex coilovers since this build was more than show. He had performance in mind for this project.  Matched to our coilover package is another new offering- EDFC Active. This was, in fact, one of the first cars in New England to sport this setup. But, this car is full of plenty “firsts” for its region.

By the looks of it, you can see that no expenses were spared. No corners cut. Brian wanted to push the emphasis on JDM and he chose the highest quality for parts that he could find, which happen to be the very same brands he sells at J T Motoring.

The spec sheet has more listed than all the ingredients needed for a Thanksgiving dinner. And looks to be more delicious, too.

 

Exterior:
APR Carbon Fiber Fender Insert
APR Carbon Fiber Brake Inlet Ducts
APR Carbon Fiber Trunk Garnish
Rocket Bunny Version 1 Kit
Buddy Club LED Tail Lights
JT Motoring Custom Retrofit Black Housing Head Lights
Nokya Yellow Turn Signal Front Bulbs.
Footwork/Brakes:
TEIN Flex (JDM Version)
TEIN EDFC Active with GPS
Tanabe Front and Rear Tower Bars
Buddy Club 4 piston/ 330mm rotors Front Brake Kit
Buddy Club 2 piston/ 330mm rotor Rear Brake Kit
 
Engine:
HKS Supercharger
ARC Oil Catch Can
Buddy Club Racing Spec Condenser Grouding Kit
MXP Front Pipe
MXP Cat-back with adjustable exhaust tip
HKS Oil Cap
Interior:
Bride Euro 2 seats in red buck skin
Bride Type VZ brackets
ATC Carbon/Suede Steering Wheel
MXP Titanium Shift Knob
STRI Club Sport Boost Gauge
STRI Vent Pod Gauge Holder
Kenwood dnn0990hd Double DIN Navi/DVD Receiver
Takata Drift 2 4pt Harnesses
Wheels/Tires:
Volk Racing TE37RT
18×9.5 +23 front
18×11 +17 rear
Wheelmate 5×100 to 5×114.3 conversion front 25mm
Wheelmate 5×100 to 5×114.3 conversion rear 30mm
Project Kics leggdura racing lugs
And they’re not done yet. More parts are being added to this project! We’ll try to get updates on this build!
For those of you out there in New England, give our friend Brian at J T Motoring a call. He can help you get your build to where you want it to be!J T Motoring
1183 Hyde Park Ave.
Boston, MA 02136
Tel: 617-364-6888
Web: www.jtmotoring.com
Also, please be sure to follow them on their Facebook page!