Tag Archives: Temperature

Defi Advance CAN Driver Now Available!!!

Posted on by

We made mention of this newest offering from Defi a few months ago, and finally they’re here!

Just a quick rundown of what it is and what type of customer this is applicable to:

It’s a plug & play kit for OBDII vehicles. Let’s say you want high precision gauges in your car (which of course Defi makes!!!), but the hassle of having to install each gauges (temperature and/or pressure) is too time consuming, or even costly (especially if you have a technician install them). The Advance CAN Driver is your type of system!!!

By using the included OBDII Harness Kit (comes with part number DF15601), you simply hook up to the On-Board Diagnostic port, then link whichever Advance Series of gauges using the Daisy Chain meter wire from the CAN Driver to the gauge (and each subsequent gauge; up to three gauges can be installed). All that’s left is where you plan on mounting the CAN Driver unit and your gauges!

Installing gauges this way not only simplifies the installation process, but it also takes advantage of pulling all the engine data from the ECU. Afterall, the issue with OE gauges isn’t that their sensors are faulty or too slow. They are, in fact, quite accurate and quick. The real issue lies with how quickly the gauges return this real-time data into something you can see. The response time for OE gauges, as most of us know, is relatively slow. Now, with Advance CAN Driver operating your Advance series gauges, you have a high precision and fast functioning gauge setup, and all it took was a couple of minutes to hook up and get going!

However, some readings aren’t readily accessible from the factory ECU, such as engine speed (RPM). So, in order to use Advance CAN driver for other parameters like engine temperatures or pressures, you can still use Advance CAN Driver. But to get engine speed, you will need to use Defi’s Advance Control Unit in conjunction with the Advance CAN Driver.

So far, we have two available kits:

Defi Advance CAN Driver
part number: DF15601

MSRP: $189

Includes: Advance CAN Driver Unit, OBDII Harness Kit, Adapter Wire, Power Source Wire, Speed & Tachometer Signal Wire, and a few small installation parts.

CAND_Meter_ZD

*does not include gauges faintly visible in the background.

 

Defi Advance CAN Driver + Advance BF 80mm Tachometer (White)

part number: DF15702

MSRP: $412

Includes: Advance CAN Driver, Advance BF 80mm Tachometer in White (11k rpm), Power Source Wire, and a few small installation parts.

set-BF80

Contact your nearest authorized TEIN dealer to order!

Defi CAN Driver Gauges

Posted on by

Defi has created a new revolutionary line of gauges! This time, the gauge set is a much more simple installation for OBDII equipped (compatible with ISO-CAN) vehicles.

CAN-DRIVER resize

By using an OBD port harness, the Defi CAN Driver can link up to three gauges, and these gauges do not require the use or installation of sensors/sending units typically supplied with Defi gauges. In other words, you can now display factory engine parameters such as Boost, Intake Manifold Pressure, Tachometer, and/or Water Temperature.

This is the perfect compliment to many newer vehicles that don’t even display such parameters anymore. A lot of cars do away with water temperature readings and simply show you a cold or hot light. And yes, we still manufacture cars without tachometers (for cars that still use internal combustion engines).

CAN Driver was developed on the success of the Smart Adapter series, which is also capable of pulling all engine parameters from an OBDII port. The factory ECU is responsible for all engine function, so it isn’t as if the OE ECU is terrible. It’s the way engine vitals are being displayed on factory gauge clusters that is the biggest problem. As we’ve mentioned in previous Defi related posts, a lot of car manufacturers chose to use as affordable a gauge cluster as possible. That means sacrificing performance (and true readings) for a more aesthetically pleasing gauge display.

The obvious benefit of the CAN Display system is that you no longer have to locate a spot to install aftermarket sensors, or resort to aftermarket adapters like oil filter sandwich adapters, to make them fit properly. The factory sensors are more than adequate. The real problem is either your car doesn’t have these engine readings, or the readings are inaccurate, which many OEM gauge clusters have issues with. To have a properly functioning gauge to provide you with imporant engine vitals can be extremely important, especially to those that have modified their engine for more power. Not being able to monitor items such as pressures and temperatures can lead to detrimental engine failures. Best of all is that this is all plug and play. No need to solder any wiring (unless possibly you’re link the Advance Control Unit- the Control Unit may suggest soldering for power supply), and you can simply unplug all the components within a couple of minutes, if not less.

With the Defi CAN Driver setup, you will have real-time data of your engine’s vitals, and with the reknowned Defi precision and performance they’ve made their name on! Not to mention that Defi gauges give your car a great look!!!

cand_connect1e

The diagram below shows an Advance ZD (DF09701) unit installed. This is only possible by also installing the Advance Control Unit (DF07703) in conjunction with the CAN Driver. The use of Advance ZD is for customers that also want to obtain speedometer using Defi’s system. However, it is not necessary if you only plan to use CAN Driver to power one of the three gauges (Boost, Intake Manifold Pressure, Water Temperature, and/or Tachometer).

cand_connect_ilm_e-600x328

There will be four available part numbers for the CAN Driver series:

DF15601- Defi CAN Driver (msrp $189)

DF15701- Defi CAN Driver + Advance BF 60mm Tachometer set (msrp $377; ***special order part number***)

DF15702- Defi CAN Driver + Advance BF 80mm Tachometer set (msrp $412)

DF15801- Defi CAN Driver + Advance A1 80mm Tachometer set (msrp $447)

 

From there you can add any of the following gauges: Boost, Intake Manifold Pressure, and/or Water Temperature.

For the upcoming new Advance A1 gauges, the applicable CAN Driver  gauge part numbers are:

DF14802 – 2 Bar Boost Gauge (msrp $215)

DF15302- Water Temperature (msrp $215)

 

 

cand_set1

The new CAN Driver series is set to be released in the U.S. in limited supply by the beginning of Summer 2016!

 

 

A Cleverly Mounted Defi Advance ZD!!

Posted on by

Not too long ago, we were contacted by Mike Bratcher of Riseful. He was really interested in Defi’s Advance ZD unit as a solution for metering his engine without the clutter of gauge dials mounted on and around his dash.

He later followed up with us, wanting to order more Advance ZD units, and it seemed that it was because of his unique mounting solution on his NSX that it generated some buzz.

As mentioned earlier, Mike wanted to eliminate a cluster of gauges on his dash, preferring to keep with his car’s subtle interior design cues. His solution? Mounting the Advance ZD where the stereo screen. This of course meant the removal of his stereo screen, but since his died out, it made a perfect location for his custom mounting idea.

Here are some pictures that Mr. Bratcher shared on NSXprime.com:

 

IMG_5118_zps48yz4d15

346B7117_zpsds9rqhkp

346B7104_zpsputykqeh

346B7098_zpsooqb99ak

 

A very well excecuted job, Mr. Bratcher!!!

Interested in mouting your Advance ZD in similar fashion? Mr. Bratched seems to have documented this installation pretty well on NSXprime. Check out his post!

 

 

 

 

New Defi Gauge Options

Posted on by

Attention Defi Fans!! Defi has released two lines of gauges for those looking for something a little outside of the box.

DEFI RS.C2 (Small)

The first of the two is the Defi Advance C2 gauge series. Now I know that most of you are going to  say “Why in Pink?,” but give them a chance as they aren’t bad looking! They actually look quite nice! These gauges require the use of the Advance Control Unit similar to the Advance BF and Advance CR series and,  as detailed,  come in a Pink color or a Blue color for the trim. The needle and bezel are a retro silver color, which accents the gauges really well and work with the numbers which light up a bright white. These gauges are only offered in Boost, Manifold Pressure, Oil Pressure, Fuel Pressure, Oil Temperature, Water Temperature, Exhaust Temperature, and Tachometer in 9000 and 11000 RPM.

DEFI C2

DEFI C2 Pricelist.REV

 The second gauge is more of a nostalgic throwback with the Defi RS gauges. I’ll be honest with everyone, these gauges are extremely good looking, as some of you may already know, I am partial to old school cars. A lot of older Japanese vehicles have Nippon Seiki’s “NS” logo on the OE cluster to which these gauges also had it placed on the face. The colors offered are the same as many of the old school cars did, in that classic green color and the classic white that is interchangable (one gauge = 2 different color options). These gauges also require the use of the Advance Control Unit and would be offered in  Boost, Manifold Pressure, Oil Pressure, Fuel Pressure, Oil Temperature, Water Temperature, and Exhaust Temperature. An 80mm Tachometer is currently in development, but also expected to be released in the near future.

DEFI RS

DEFI RS Pricelist.REV

 

Both gauges are currently on a Special Order type basis and can be purchased through any TEIN Authorized Dealer. However, these gauges may not be around for too long, as Defi decided to have limited production manufacturing of both gauges. The C2 gauge manufacturing would be ending in June of 2014 and the manufacturing of the RS gauges would be ending in February 2015. If any of these gauges do catch your eye, I recommend taking advantage of these gauges while supplies last.