There has been many customers inquiring about the Upper Mounts with Camber adjustability.

Yes, we do offer Upper Mounts with Camber adjustability and they are offered for certain applications, with MacPherson Struts type suspension.

Here is a quick look at a MacPherson strut and why it is able to be used with a Camber plate.

MacPherson Strut Type – A design in which the strut connects to the hub assembly directly to the chassis of the vehicle. No upper arm is used to control the movement of the hub. This design usually allows the camber and caster angle of the suspension to be adjusted from the upper mounts. Some vehicles with front struts may not use camber adjustable mounts because of limited space in the strut tower or major design differences of upper mount designs.

Multi-Link aka Shock Type – Independent or multi-link type suspensions utilize a shock. An upper and lower control are used to control movement of the hub. (double A-Arm, wishbone, etc…). This design does not allow camber or caster adjustment to be made from the upper mounts since all it will be doing is moving the coil over from one side to the other without adjusting camber since it does not bolt on directly to the hub for camber or caster adjustments.

The Upper Mount below is a Camber Adjustable plate offered for some applications with MacPherson type Coilovers.

The below Pillow Ball Upper Mount is for Multi-Link Suspension it is not camber adjustable but it is a good replacement of the OEM Upper Mount since a NWB spherical bearing is used in place of the rubber bushing, which allows for improved tire grip and more accurate wheel alignment.