Congrats to the Rally xD Team for Reaching the Summit!!!

In its second year contesting the Pikes Peak International Hill Climb, the Rally xD team successfully reached the top (a breathtaking 14,110 feet in elevation) for 2013! They placed a 12:39 ET, making them the fastest front-wheel drive vehicle for this event!

xd pikes 2 (Custom)

Crew Chief Philip Chase reported that conditions changed constantly, from snow, wind, hail, and whatever the gods of racing can throw at them. Traction would prove to be difficult, especially as the xD’s turbocharger started to build full-boost. Wheel slip was nearly unavoidable.

In a post I made last year, I mentioned a little on how hard that actually is for both man and machine. You not only have to battle uphill (or upmountain, if that makes more sense), but the higher up you go, the thinner the oxygen supply in the air is, making it difficult for the driver and car to breathe as if it were at sea level. At least the Rally xD relies on some turbocharged assistance to get the most oxygen into the engine. Can’t say the same for driver Andrew Comrie-Picard, unless he was hooked up to some oxygen tank. Even then, power output is cut drastically by the time they cross the 10,000 ft mark.  Water and oil temperatures also suffer the higher up you travel, and if you’re hard on the brakes, the boiling temperature will also drop. So many things to factor in that can go wrong while driving.

Needless to say, the team didn’t have it easy. And this xD being their sole chariot for racing duties during the 2013 Rally America season, they’d  have a lot to lose if this car found itself over the cliff.  But, we’re talking about seasoned rally veterans. They know what they’re doing. Again, the xD saw the finish line under its own power. Some teams weren’t so lucky. The Love Fab NSX, for example, crashed during practice and went up in flames cutting their weekend short. Mechanical failures are to be expected to varying degrees. Drivers are pushed to their very limits. We’re  just glad to see that nothing major went wrong for the xD crew.

xd pikes 3 (Custom)

It goes without saying that the highlight of the event was seeing Red Bull and their Peugeot 208 T16 with 875bhp and all-wheel drive, commandeered by WRC veteran Sebastien Loeb, break the record by a large margin. How about 8m:13.878sec to the top?! Last year’s record of 9:46 by Rhys Millen in his Hyundai Tiburon was still quite an achievement considering that was the first year of an all-paved course, and in rear-wheel drive only. To his acknowledgement, Rhys bested his own record with a 9:02.192 in his Hyundai PM580T.

Oh, and our good friends at Evasive Motorsports broke the 10 minute barrier (10:59)  in their Time Attack Scion FR-S! Way to go, guys!

The 2013 event also saw a return of the Electric Car class. Say what you want about it, but a race car’s a race car no matter how it sounds. We should truly embrace this form of racing technology.

All in all, a great event. New records have been set, and we should all look forward to another record-smashing year in 2014!

 

 

 

NEW LIMITED OFFER, DEFI TRIPLE METER PACKAGE

The Triple Meter Package consists of packages of turbo, oil pressure, oil temperature gauges(ADVANCE CR or ADVANCE BF) and ADVANCE Control Unit.

DF12201 DF ADVANCE CR 60 TRIPLE METER SET WHITE
DF12202 DF ADVANCE CR 60 TRIPLE METER SET BLACK
DF12301 DF ADVANCE BF 60 TRIPLE METER SET WHITE
DF12302 DF ADVANCE BF 60 TRIPLE METER SET RED
DF12303 DF ADVANCE BF 60 TRIPLE METER SET BLUE

There are 5 types of set, CR white, CR black, BF white, BF amber red, and BF blue.

The gauge diameters are 60mm and the turbo gauges are 200kPa models.

Retail Cost for the CR Models is $980

Retail Cost for the BF Models is $1065

If everything were to be purchased separately for the Advance BF models the cost is $1102.

If everything were to be purchased separately for the Advance CR models the cost is $1028.

Remember this is only for a limited time. Limited quantity will be released.

Hurry and order yours today!

 

Zoom, Zoomin’ on TEIN

Another TEIN staff had mentioned this car earlier this month which caught my attention after checking out the post on Speed Hunters. The 2005 Mazda 3 SP23 4dr is not your typical car that would be used for drag but definitely thinking out of the box.

This car has taken a full gutting, even changing out the front and rear windscreens, as well as changing to a smaller battery and relocating it in the front passenger foot-well along with the ignition system mounted next to the drivers seat for quick access.  A 6 point roll cage and harness bar custom made by Mercury Motorsports located in Australia assure more safety when the car is screaming down the track. The car amazingly still has the stock brakes but as a precaution a  Deist parachute was added should the brakes give out when clocking in times of 11.6 @ 130mph.

 

 The engine was as built by Mercury Motorsports , changing to Pauter Rods, Wiseco Pistons, Cosworth Head Gasket and Water Pump, Weapon R Intake Manifold, Mishimoto 52mm Half Core Radiator and adding a GT3528R turbo with a 44mm Tial Wastegate with a side exit exhaust to give it that extra kick and achieve 405hp at the front wheels.

Keeping that SP23 planted to the track would be a combination of Mickey Thompson Drag Slicks and TEIN Super Streets coilovers.

For most info and pics of the car check out Speed Hunters weblink below.

 http://speedhunters.com/archive/2011/11/28/car-feature-gt-gt-zoom-zoom.aspx.

 

NEW DEFI ITEMS

DEFI now has Turbo Gauge plus Controller packages.  These packages are now available for purchase through any of our authorized dealers.

DESCRIPTION

PART NUMBER MSRP MSRP SAVINGS

DF ADVANCE CR 60 TURBO 200KPA SET WHITE

DF11301 $424 $51

DF ADVANCE CR 60 TURBO 200KPA SET BLACK

DF11302 $424 $51
DF ADVANCE BF TURBO 200KPA SET WHITE DF11401 $435

$56

DF ADVANCE BF TURBO 200KPA SET AMBER DF11402 $435

$56

DF ADVANCE BF TURBO 200KPA SET BLUE DF11403 $435

$56

 

 

 

 

The ADVANCE Control Unit and ADVANCE Turbo gauge are packed in the larger box in the background.

We also received Meter Visors for both 52 and 60 mm Gauges.

DESCRIPTION

PART NUMBER MSRP

DF SINGLE METER VISOR 52

DF11101

$27

DF SINGLE METER VISOR 60 DF11201

$27

 

Past TEIN USA Demo Cars

Was looking through some older pictures on our server and found these. Some of the modifications may be considered out-of-date but at the time these cars were built this was the trend.

2004 Scion xB – built in 2004, debuted at SEMA 2004.  Featured TEIN’s Hybrid Wagon Dampers which allows for ride height adjustment from the cockpit. Greddy turbo kit, custom metal widebody, Bride seats front and rear, custom dash, Racing Hart wheels, and complete Lightning Audio setup. Was sold a couple times, last seen with new a paint job and many of the goodies removed.

1999 Nissan Silvia S15 – initially built in 2005, debuted at SEMA 2005, and went on to continually be modified/ revised/ re-tuned until 2007. 650WHP, RB28DETT (stroked), V-mount, OS Giken 6-speed sequential transmission, TEIN Super Racing coilovers, C-West widebody, stitch welded, crazy roll cage, too much to list. Now owned by a private party in California.

2006 Honda Civic Si Coupe – built in 2005, debuted at SEMA 2005. Custom metal widebody, custom turbo setup, custom red suede interior, TEIN Mono FLEX coilovers, Enkei RPF1 Type RC wheels, etc… Stolen while on the HIN tour and later recovered completely stripped.

2006 Volkswagen Golf GTI mk. V – built in 2006, debuted at SEMA 2006. Featured TEIN Euro Dampers, BRS widebody, host of Seibon Carbon parts, APR Turbo upgrade, JE pistons, Carrillo rods, Bride Gias Carbon Kevlar seats, custom Rothschild Fabrication roll bar, dual composite NX nitrous kit, and custom AutoArt VX wheels. Sold to a used car dealership, not sure where this car ended up.

2007 Toyota Yaris 3-dr – Built in 2006, debuted at SEMA 2006 and competed at Super Lap Battle Finals 2007 (driver Andy Hope pushed this car to a 2:08.091). Burnout bodykit from Japan, custom painted graphics, Super Charger kit, KAAZ LSD, Custom Rothschild Fabrication roll cage, Bride Bucket, Defi Meters, and custom spec TEIN Super Street coilovers. Currently sitting inside one of Toyota’s warehouses.

more past demo cars to be revisited in the future…